高速接縫式自動包裝機.rar
高速接縫式自動包裝機,摘要是實現薄膜材料裹包塊狀物品的一種包裝設備，廣泛應用于食品、化工、日用品、醫藥、小五金等部門。本文在分析的包裝工藝和使用要求的基礎上，通過對關鍵部件的理論分析，提出一種實用、簡單、可靠和通用的傳動系統，將單一包裝尺寸拓展為袋長和產量可調的結構形式;對供送薄膜結構、中封牽引器結構...
該文檔為壓縮文件,包含的文件列表如下:
內容介紹
原文檔由會員 夢幻星光 發布
摘要
高速接縫式自動包裝機是實現薄膜材料裹包塊狀物品的一種包裝設備，廣泛應用于食品、化工、日用品、醫藥、小五金等部門。
本文在分析高速接縫式自動包裝機的包裝工藝和使用要求的基礎上，通過對關鍵部件的理論分析，提出一種實用、簡單、可靠和通用的傳動系統，將單一包裝尺寸拓展為袋長和產量可調的結構形式;對供送薄膜結構、中封牽引器結構等關鍵部件的設計原理、結構特點等做了較為詳細的研究和設計。
本文研究了補償原理、補償結構，設計出中封牽引薄膜的補償裝置:采用齒輪差動補償機構，可提高包裝機的可靠性;提出適應包裝袋長度可連續變化的機構，可擴大包裝機的包裝規格和使用范圍;本文研究對其它袋裝包裝機械的設計和開發有著積極的指導意義。
本文借助了AutoCAD等繪圖軟件進行傳動系統、薄膜供送系統以及中封系統的結構設計，這種利用計算機作輔助設計和分析的方法，可以應用于其它類型包裝設備的設計
和分析中。
關鍵詞:供送薄膜；中封牽引器；包裝工藝；補償機構；傳動系統
Design of Film Feeding Structure and Mid-seem Driving Structure —— The high-speed automatic seaming packer
ABSTRACT
The high-speed automatic seaming packer can pack the nubbly product with film,especially use in the area such as foods,chemical products,commodity,medicine,hardware etc.
Through analyzes the packing techniques,using requirements and the principles of the key part of the high-speed automatic seaming packer, this paper offered an applied,simple,stable and universal driving system which using a new structure from that can adjust the packaging length and the output instead of the single packaging size.In this paper,desigh priciples and structure characteristics of the key parts such as film feeding structure,mid-seem driving structure,end-seem cutter structure have been researched and designed in detail. In this paper,through builing the moving,analyzes the kinematics dislinarain of the every organ and offers the feasible optimizing structure to meet the packaging technology needs. At the same time,this paper offers an integrated design mathod to the key parts.
This paper designs a mid-seem film driving compensatory device throught research the compensatory principles and the compensatory structure. Analyzing a gearing differential compensatory organ can help to increase the reliability of the packdging machine.Through offers a structure that can adapt the change of the length and and-seem cutting swivel shifting structure,make the multi-funtion of the packaging machine come ture.Integrating the electric control system,this paper offers a driving system structure which can adapt the change of the packaging bag length and can direct the design and exploiation of other bag packaging machine actively.
This paper analysis the moving disciplinarian and structure design using AutoCAD etc. This mathod that using computer aided design and analysis can apply to other packaging machine’s design and analysis.
Keywords: Film Feeding; Mid-seam Retractor;Packing Technics; Compemsatory Structure ;Driving System;
目 錄
1緒論 1
1.1高速接縫式自動包裝機的應用及使用范圍 1
1.2高速接縫式自動包裝機的結構特點 1
1.3高速接縫式自動包裝機的國內外發展狀況 3
1.5研究的內容和目的 4
1.5.1設計重點 4
1.5.2設計方法 4
1.5.3技術路線 5
1.5.4解決關鍵問題 5
2總體布局及傳動 6
2.1總體方案設計 6
2.1.1功能與應用范圍 6
2.1.2工藝分析 7
2.1.3總體布局 9
2.1.4工作循環過程 10
2.2總體傳動系統 11
2.2.1傳動系統的組成 11
2.2.2供送薄膜的傳動系統分析 14
2.2.3中封牽引器的傳動分析 15
2.2.4高速接縫式自動包裝機傳動系統 17
2.3電動機選擇、傳動系統運動和動力參數計算 18
2.3.1電動機的選擇 18
2.3.2 傳動零件的分析和計算 20
2.4本章小結 31
3薄膜供送系統結構設計 31
3.1結構方式 31
3.2牽引張力的確定 33
3.3本章小結 37
4中封系統的結構設計 38
4.1結構方式 38
4.2補償問題的分析 40
4.3差速器的設計和計算 43
4.4補償機構的運行 51
4.5本章小結 52
設計小結 53
參考文獻 54
附 錄 55
致 謝 56
高速接縫式自動包裝機是實現薄膜材料裹包塊狀物品的一種包裝設備，廣泛應用于食品、化工、日用品、醫藥、小五金等部門。
本文在分析高速接縫式自動包裝機的包裝工藝和使用要求的基礎上，通過對關鍵部件的理論分析，提出一種實用、簡單、可靠和通用的傳動系統，將單一包裝尺寸拓展為袋長和產量可調的結構形式;對供送薄膜結構、中封牽引器結構等關鍵部件的設計原理、結構特點等做了較為詳細的研究和設計。
本文研究了補償原理、補償結構，設計出中封牽引薄膜的補償裝置:采用齒輪差動補償機構，可提高包裝機的可靠性;提出適應包裝袋長度可連續變化的機構，可擴大包裝機的包裝規格和使用范圍;本文研究對其它袋裝包裝機械的設計和開發有著積極的指導意義。
本文借助了AutoCAD等繪圖軟件進行傳動系統、薄膜供送系統以及中封系統的結構設計，這種利用計算機作輔助設計和分析的方法，可以應用于其它類型包裝設備的設計
和分析中。
關鍵詞:供送薄膜；中封牽引器；包裝工藝；補償機構；傳動系統
Design of Film Feeding Structure and Mid-seem Driving Structure —— The high-speed automatic seaming packer
ABSTRACT
The high-speed automatic seaming packer can pack the nubbly product with film,especially use in the area such as foods,chemical products,commodity,medicine,hardware etc.
Through analyzes the packing techniques,using requirements and the principles of the key part of the high-speed automatic seaming packer, this paper offered an applied,simple,stable and universal driving system which using a new structure from that can adjust the packaging length and the output instead of the single packaging size.In this paper,desigh priciples and structure characteristics of the key parts such as film feeding structure,mid-seem driving structure,end-seem cutter structure have been researched and designed in detail. In this paper,through builing the moving,analyzes the kinematics dislinarain of the every organ and offers the feasible optimizing structure to meet the packaging technology needs. At the same time,this paper offers an integrated design mathod to the key parts.
This paper designs a mid-seem film driving compensatory device throught research the compensatory principles and the compensatory structure. Analyzing a gearing differential compensatory organ can help to increase the reliability of the packdging machine.Through offers a structure that can adapt the change of the length and and-seem cutting swivel shifting structure,make the multi-funtion of the packaging machine come ture.Integrating the electric control system,this paper offers a driving system structure which can adapt the change of the packaging bag length and can direct the design and exploiation of other bag packaging machine actively.
This paper analysis the moving disciplinarian and structure design using AutoCAD etc. This mathod that using computer aided design and analysis can apply to other packaging machine’s design and analysis.
Keywords: Film Feeding; Mid-seam Retractor;Packing Technics; Compemsatory Structure ;Driving System;
目 錄
1緒論 1
1.1高速接縫式自動包裝機的應用及使用范圍 1
1.2高速接縫式自動包裝機的結構特點 1
1.3高速接縫式自動包裝機的國內外發展狀況 3
1.5研究的內容和目的 4
1.5.1設計重點 4
1.5.2設計方法 4
1.5.3技術路線 5
1.5.4解決關鍵問題 5
2總體布局及傳動 6
2.1總體方案設計 6
2.1.1功能與應用范圍 6
2.1.2工藝分析 7
2.1.3總體布局 9
2.1.4工作循環過程 10
2.2總體傳動系統 11
2.2.1傳動系統的組成 11
2.2.2供送薄膜的傳動系統分析 14
2.2.3中封牽引器的傳動分析 15
2.2.4高速接縫式自動包裝機傳動系統 17
2.3電動機選擇、傳動系統運動和動力參數計算 18
2.3.1電動機的選擇 18
2.3.2 傳動零件的分析和計算 20
2.4本章小結 31
3薄膜供送系統結構設計 31
3.1結構方式 31
3.2牽引張力的確定 33
3.3本章小結 37
4中封系統的結構設計 38
4.1結構方式 38
4.2補償問題的分析 40
4.3差速器的設計和計算 43
4.4補償機構的運行 51
4.5本章小結 52
設計小結 53
參考文獻 54
附 錄 55
致 謝 56
