汽車智能助力轉向系統結構設計

摘    要

隨著人們對汽車安全性、舒適性、經濟性要求的不斷提高，對于汽車轉向的舒適性及靈敏性也提出了更高的要求。轉向性能作為汽車性能的一項重要評價標準。也越來越受到人們的關注。在僅僅幾十年的時間里，汽車轉向系統就經歷了從傳統的機械式轉向到液壓動力轉向的過渡過程，并且向著電動助力轉向系統的方向發展。電動助力轉向系統是一種新型的汽車轉向系統，具有以往任何助力轉向系統所不具備的助力效果和車速感應能力，其核心部件電控單元能根據車速和方向盤操控力矩的不同決定是否助力以及助力的大小。本文在介紹液壓助力轉向系統、電控液壓助力轉向系統的發展過程和分析比較它們優缺點的基礎上，闡述了國內外汽車電動助力轉向的研究現狀，詳細分析了電動助力轉向的工作原理、結構及其特點，提出了電動助力轉向系統需要解決的幾個關鍵技術，并展望了其發展趨勢。
本文首先介紹了電動助力轉向系統( Electric Power Steering ， EPS) 的工作原理和結構特點， 同時提出系統設計方案，并對方案進行比較、優化，然后進行EPS的結構設計、參數設計計算，進行有關力學分析計算。最終完成EPS結構設計和關鍵部位的設計。

關鍵詞：電動助力轉向（EPS），設計方案，結構設計，優化設計

ABSTRACT

Along with people to car safety、comfortable、economy of continuously pursue,and the electric power steering technique has to be an important one of development of car techniques. Within short and short and several decades，the power steering system has experience the traditional mechanical system to the hydraulic power steering system to the electric power steering system. Electric Power Steering (EPS) is a new type of vehicle steering system. It has the efficiency of assistance and the sense of speed, which any other type of system doesn’t have. According to the speed of vehicle and torque on steering wheel, Electric Control Unit (ECU)，a main part of EPS, can decide the amount of power to assist. The EPS techniques make progress perfectly and it is going to replace traditional Hydraulic Power Steering (HPS).It is a new high-tech which follows the development of modern automobile. In this thesis, we first analyze the development process of the traditional HPS system, the electronic control HPS system and the EPS system. Then, their merits and defects are also compared. The present developing situation and prospect of EPS is outlined and the principle, structure and characteristics of EPS are discussed. Some key techniques of EPS are also presented.
This paper introduces the feature principle and structure about EPS, at the same time put forward the whole design project, then compare and optimize the programmes. Then proceed to EPS of structural design, design parameters, the conduct of the mechanics of calculating. EPS structure of the final design and hand over parts design plans.

Key words： Electric Power Steering, design project, Structural Design, optimization design

目   錄

中文摘要 Ⅰ
ABSTRACT Ⅱ
1緒論 1
  1.1 電動助力轉向系統概述 1
  1.2 電動助力轉向系統（EPS）的特點 2
1.2.1 助力特性 2
1.2.2 操縱靈活性與穩定性 2
1.2.3 增強了轉向跟隨性 3
1.2.4 節能環保 3
1.2.5 安全性 3
1.3 課題的研究目的及意義 3
1.4 國內外研究現狀分析 4
1.5 本論文的主要研究內容 5
2 電動助力轉向系統（EPS）的結構及受力分析 6
  2.1電動助力轉向系統的機構及關鍵部件 6
2.1.1 EPS的主要結構 6
2.1.2 EPS的工作原理 7
2.1.3 EPS的關鍵部位 7
2.1.4 EPS的關鍵技術 9
  2.2 電動助力轉向系統的分類 10
  2.3 EPS的受力介紹 11
2.3.1 駕駛員的操縱力 11
2.3.2 EPS的阻力矩 11
2.3.3 EPS的助力矩 12
2.4 助力特性介紹 12
2.5 本章小結 14
 3 EPS總體方案的設計 15
 3.1 電動助力轉向系統（EPS）總體結構方案 15
 3.2電動助力轉向系統的組成部件的設計選取 16
   3.2.1 EPS傳感器 16
   3.2.2 電動機 16
   3.3.3 減速機構 18
  3.3 EPS助力傳動方案的分析比較與優化 18
     3.3.1 方案的對比 19
     3.3.2 傳動機構性能比較 20
  3.4 小結 23
4 電動助力轉向系統（EPS）關鍵部件的設計 24
 4.1 轉向軸的設計計算 24
4.2普通圓柱蝸桿傳動的主要參數幾何尺寸的設計與計算 27
4.3 本章小結 31
5 結論 32
致謝 33
參考文獻 34