包括設計說明書，設計圖紙和前期資料


畢 業 設 計   中 文 摘 要
　　　
　　　設計了一款雙層私人立體車庫，設計內容包括：車庫的機械結構設計和車庫的控制系統設計兩個部分。機械結構部分包括下層載車板的橫移機構設計和上載車板的升降機構設計。上載車板的升降機構為平面搖桿機構，這樣使得在升降過程中可以避開下層所停放車輛，實現雙層車庫車輛的自由停取?？刂葡到y(tǒng)的設計主要包括液壓回路的設計和PLC電路設計及其程序設計。主要依靠電磁換向閥來實現動作切換，基本操作輸入為按鈕輸入，并以接近開關作為運動終止的判斷及反饋依據。

關鍵詞  載車機構  升降橫移  液壓系統  PLC控制系統 

畢 業 設 計   外 文 摘 要

Title    The  Design  of  Double  Private  Parking  System    

       
Abstract
A double private parking system is designed.This design mainly includes two aspects:the design of mechanical structure and the design of controlling system.The design of mechanical structure is composed of the lateral movement of the lower tray and the vertical movement of the upper tray. To avoid the collision with the lower vehicle during operation. The vertical movement of the upper parking board is in accordance with the crank-rocker mechanism, achieving the function of the vehicles’ parking in and out freely. Control System includes two aspects: hydraulic circuit and PLC circuit and program of which. Switching among the moments is implemented by electromagnetic valves.All the initial moments are operated with buttons,and stopped by the proximity switches.

Key Words：tray，lateral and initial moments, Hydraulic system，PLC controlling system.

目錄

1  緒論 1
1.1  機械式立體車庫概述 1
1.2  課題目的、意義與來源 2
1.3  本文研究的主要內容 4
2  雙層私人立體車庫機械結構的設計 5
2.1  停取形式的選定 5
2.2  基本尺寸的設計 6
2.3  零件的設計及強度的校核 7
2.4  液壓源的選用和校核 21
3  雙層私人立體車庫控制系統的設計 24
3.1  控制系統方案論證 24
3.2  控制系統的設計方法和步驟 25
3.3  控制系統的硬件設計 27
3.4  I/O 地址分配 28
3.5  PLC程序設計 29
結束語 31
致謝 32
參考文獻 33