Distributed control system in thermal application of automatic control (foreign language translation)
Abstract: the distributed control system (DCS) is a computer technology and automation technology combined with the results of the development. Combining with the new Shanghai new furnace thermal three two machine adopts distributed control system (DCS) to implement the automatic control engineering practice, this paper introduces the DCS system characteristic and the function, and according to the operation condition of DCS system, and combining with actual maintenance on this simple.



Keywords: DCS system maintenance thermal control



A, hardware maintenance

1. The process channel. The I/O modules of judgment and processing general fault diagnosis system is through the use of the module, change method to deal with. As for the internal components aging internal factors such as the module is not normal, caused by general ther……
……
摘要：分散控制系統(DCS) 是計算機技術和自動化技術相結合發展的結果。本文結合新滬熱電廠新建三爐兩機采用分散控制系統(DCS) 實現自動控制的工程實踐, 介紹DCS 系統特點和功能, 并根據DCS 系統的運行情況,結合實際維護進行簡單闡述。

關鍵詞：DCS 系統 日常維護 熱工控制
　　
　　一、硬件維護
　　1.過程通道。I /O 模塊故障的一般判斷與處理是通過系統診斷, 用更換模塊的方法處理。至于其內部元件老化等內部因素造成的模塊不正常, 一般熱控人員不好判斷。原則上I /O模塊的檢修應由廠家處理,目前我廠的熱工檢修人員的技術水平還達不到這種水平, 不能象檢修常規儀表那樣得心應手。并且現在的儀表廠家的技術保密也不容許客戶知道他們的核心技術, I /O 模塊基本趨于一體化設計, 因此I /O 模塊的備件一定要充足。具了解這種I /O模塊的故障大多出現在調試和運行初期, 其原因有設備本身質量不過關, 也有維護人員素質差等。一般經過一個大修周期后會穩定下來。
　　2.就地設備。就地設備故障的診斷與處理同常規的故障沒有區別, 只是一次元件或控制設備出現故障時不能被操作員及時發現, 這并不一定是運行人員不認真, 主要是因?yàn)楫嬅孑^多不能全部顯示。只有異?；驁?bào)警后才能發現?！?br /> ……